UGREEN 2 in 1 Wireless Bluetooth 5.0 Transmitter and Receiver 3.5mm Adapter, Dual Devices Simultaneously, Aux Bluetooth Audio Car Adapter Compatible with TV Car Home Stereo System Headphones (80893)
Technological advancement has led to the decrease of use of cables and wires in electronics. Thanks to Bluetooth transmitter and receiver, you do not need to replace your old home theatre, TV set or PC just because they are not Bluetooth enabled. UGREEN 2 in 1 Wireless Aux Bluetooth adapter will work well with your TVs, PCs, home theatres, car stereos, as well as MP4 players and transform these to Bluetooth enabled devices.
Specification
Bluetooth 5.0: For fast and stable transmission
Built-in Microphone: Support Microphone in RX Mode
Fast Setup: User friendly and extra easy to use
2 in 1 Adapter: Support both Bluetooth transmitting and receiving, namely TX and RX Mode
Dual Pairing: Can be paired with two Bluetooth devices simultaneously
Protable Size: Mini and lightweight design make it easily to carry around
Codec: SBC in TX mode and SBC/AAC in RX mode
Distance: About10M
FAQ:
Q1. How to reset this Bluetooth adapter when it is unable to pair?
In off mode, press and hold the multifunction button for 10 seconds, the indicator will glow solid blue for 2.5 seconds, indicating a successful reset.
Q2.How to pair two devices at the same time?
TX Mode
1. Please connect the product to Device A refer to above methods
2. Short press the multifunction button twice to enter pairing mode, accompanying a blue light flashes twice per second. Re-open Bluetooth on Device B, the connection between transmitter and Device B will be established.
3. Play music to confirm both A/B devices have audio output.
RX Mode
1. Firstly, follow "Bluetooth Connection" steps to connect the product to Phone A, then turn off Bluetooth on Phone A once connected.
2. Secondly, connect the product to Phone B Bluetooth.
3. Thirdly, turn on Phone A Bluetooth access, it will reconnect to the product automatically.
4. Finally, both Phone A and Phone B are connected to the product simultaneously.
- Bluetooth Version: 5.0
- Input:3.5MM
- Bluetooth Protocol: A2DP/AVRCP/HFP
- Codec: RX mode: SBC, AAC；TX mode: SBC
- Multipoint connection: Two Point Connection
- Frequency domain: 2.402GHz-2.480GHz
- Frequency Response: 20Hz-20kHz
- SNR(Signal to Noise Ratio):＞90dB
- Transmit Range: Up to 10m/33ft
- THD ( total harmonic distortion ): <0.1%
- Transmit and receiver cannot be used simultaneously
- Battery capacity: 140mAh 3.7V (518mWh)
- USB-C Port for power supply(5V)
- USB A to C 0.5m Cable included
- Warranty: 2 Year